THE TIN VAULT Get a written quote
Tested. Yours. Local. · Edmonton, AB

Used hardware you can actually trust

Hardware prices have gotten silly, and the used market is full of untested gear and sketchy sellers. I buy used hardware, test every piece, and build what you need out of it. I also help you keep your data and your network under your own control. You deal with one person, right here in Edmonton.

Every part tested Your data stays yours One total price, quoted first
bench@tinvault: ~
$ bench run --part gpu --load full
[ ok ] inspect ....... clean, no damage
[ ok ] clean .......... done where the design allows
[ ok ] load test ...... temps in range
[ ok ] soak ........... no errors
[ ok ] label .......... RENEWED
RESULT: PASS. Cleared for a build.
Run a test on

Illustrative run. Real testing depends on the part.

01 / tested

Proven on the bench

Every part is tested under load, cleaned inside and out where the design allows, and graded honestly. If it fails, it stays out, and every label on your quote is true.

02 / yours

Your data, your call

I help you design setups that keep your files and your network in your own hands. Cloud tools are useful, and I will use them where they help, but nothing you own should depend on them.

03 / local

Neighbours first

Old gear goes back to work for someone nearby, and the money stays with a local business. I fit every build to what you need, so you never pay for a top-tier part you will not use.

Why this exists

Retail prices went up. The used market got sketchy.

Buying used should save you money without costing you sleep. Too often it means a marketplace listing with no testing and a seller who disappears when something dies.

Tin Vault sits in the middle. I pull the used market into one workshop, test what comes in, and use it to build what people want or sell it on as tested parts. When the shelf cannot cover a job, I source new parts at the best price I can find.

I also care where your data lives. Plenty of people have handed everything to the cloud without really deciding to. I help you build setups where your files, your network and your tools stay under your control, and the cloud is something you choose.

Step 1

Gear comes in

Hardware arrives from people and businesses who no longer need it. Every piece gets an honest look before it earns a place on the bench.

Start here

Start with one email.

Every job begins with a single message. Your quote is in writing, nothing gets lost, and you get a considered answer instead of a rushed one.

What I do

What do you need?

Pick a service. Nothing here has a sticker price, because every job is planned with you first and quoted as one total in CAD before I start.

tin@vault:~$ ls services/

Keyboard: press 1 to 5 to jump to a service.

Not sure where to start?

Three ways to begin.

Pick the closest one, or write to me anyway. Either way your request starts in writing, so nothing gets lost.

Sell

I have parts to sell

Send a list of what you have and I will give every piece an honest look.

Start a list
Buy

I am looking for parts

There is no catalogue and no online shop, because stock changes all the time. Tell me what you need and I will say what I have tested and on hand.

Ask for a part
Solve

I have a situation

A slow network, an old PC, a data worry, a project you cannot figure out. Describe it and we will work out a solution.

Describe it
Questions

Asked often, answered plainly

Where are you based, and can I visit?
The Tin Vault runs from a dedicated workshop in south Edmonton, and visits are by appointment. Pickups, drop-offs and local meetups are arranged once we have talked, at a time that suits you.
Why does everything start with an email?
So your request and my answer are both in writing, nothing gets lost between messages, and I can give your job proper thought instead of a rushed reply. It also leaves you a record to look back on.
What if my gear is old or not working?
Every piece gets an honest look. If it has resale life, I make an offer. If it is too old or too far gone for that, I will still take it off your hands free of charge. Working parts go toward local donation builds and the rest is recycled responsibly and kept out of landfill wherever possible.
Can I just buy a part?
Yes. You do not need a full build. I have no online shop or price list because my stock changes constantly, so tell me what you are looking for. I will say what I have tested and on hand, and if I do not have it, I will tell you so.
What happens to the data on my drives?
Every drive is sanitized following NIST SP 800-88, the media sanitization standard used by corporate IT departments. You can ask for a certificate of data sanitization listing the drive's serial number, the method used and the date.
Is everything really tested?
Anything I sell or build with is tested under load, cleaned inside and out where the design allows, and graded honestly. If a part fails, it does not go into a build.
What does renewed mean?
A used part that has been tested under load, cleaned where the design allows and graded honestly, then labelled as renewed on your quote. New parts are labelled new. You see the mix before you pay.
What if something I bought stops working?
If anything you bought from The Tin Vault stops working within 14 days, bring it back. I will repair it, replace it with an equivalent, or refund you. That is my guarantee, and it comes from me directly.
How quickly will I hear back?
I reply within 48 hours. The first reply can be a short acknowledgement that I have your request, and the full quote follows when it is ready.
How does pricing work?
There is no fixed price list. I plan the job with you, then send one total price in CAD. You approve it before I start. A quote can only be held for 5 days. Parts prices are volatile and move fast, and I would rather give you a number I can honour than one that is out of date by the time you reply.
About

Small, local and hands on.

I am Huzaifa. I build and test everything myself, in Edmonton, one job at a time. If you want a machine that fits your needs and your budget, or you have gear sitting in a closet, start with one email and I will reply with a considered answer.

← all services
Custom gaming PCs

Built around how you play, not a spec sheet.

I sit down with you and ask what you play, what you play on, and what you want to spend. Then I plan the build around that. I will not push the top of the line on you.

Parts from my tested inventory go in first. New parts fill the gaps, bought at the best price I can find.

  1. Talk

    What you play and where

    Your games, your screen and a rough budget. That is enough to start.

  2. Plan

    Inventory first

    I check what I already have tested and on the shelf. Anything that fits your plan goes on the list, labelled renewed.

  3. Fill

    New parts for the gaps

    Whatever the shelf cannot cover gets sourced new. You see the mix and one total before anything is bought.

  4. Build

    Assemble and test

    Built, cabled neatly, updated and stress tested before it comes to you.

Start your request

Tell me what you play. I will plan the rest.

One request starts the job. You get a written plan back with one total price.

  1. In writingOne message starts the job, so your request and my answer are both on record.
  2. ConsideredI read it properly and reply with a plan or quote, not a rushed one-liner.
  3. Your callNothing starts until you approve it.
What do you mostly play?
Already have
Where the money should go

Or email me at [email protected]

How a quote reads

Every part is labelled. No guessing.

Flip between a mixed build and an all-new one to see what changes. Parts that wear out or carry your data get a harder look, and I will tell you when new is the right call.

Example layout
  • Graphics cardTested under load, temperatures checkedrenewed
  • ProcessorTested, condition graded honestlyrenewed
  • MemoryBrand newnew
  • StorageBrand new, no history to worry aboutnew
  • Power supplyBrand new, safety matters herenew
  • Case and coolingCleaned where the design allows, condition notedrenewed
  • TOTALone price in CAD, confirmed before I start

Example layout only. The parts and the mix change with every build.

My 14-day promise. If something you buy from me stops working within 14 days, bring it back. I will repair it, replace it with an equivalent, or refund you.
← all services
Home lab

A small server or a powerful beast. I will fit it to the job.

Want a quiet box for Home Assistant? Done. A machine that runs Proxmox and a pile of virtual machines? Also done. Old workstations and office PCs make great lab gear, and I test the good ones so you do not have to.

If used parts cannot do the job, I source new from my suppliers at the best price I can get.

Start your request

Pick what you want to run. I will point you at the right class of machine.

The guidance on the right is a starting point for the conversation, not a final spec. One request starts the job, and you get a written answer back.

  1. In writingOne message starts the job, so your request and my answer are both on record.
  2. ConsideredI read it properly and reply with a plan or quote, not a rushed one-liner.
  3. Your callNothing starts until you approve it.
I want to run
Where that points

Or email me at [email protected]

Ready to run

Cleaned, sanitized, tested

Lab gear leaves my bench cleaned inside and out where the design allows, tested under load, with its condition graded honestly. Drives are sanitized following NIST SP 800-88, firmware is updated where it applies, and settings are reset. You install your own system on a clean slate.

Built your way

Upgrades before handover

More RAM, bigger or faster storage, extra drives, faster networking. Tell me when you order and I fit and test the upgrades first. Parts are labelled new or renewed on the quote.

Home AssistantProxmoxNASPlexDockerOPNsenseGame servers
My 14-day promise. If something you buy from me stops working within 14 days, bring it back. I will repair it, replace it with an equivalent, or refund you.
← all services
Network design

A network that keeps things where they belong.

I design and build networks for homes and small offices around a firewall and a few well-planned zones. Your smart bulbs cannot see your files. Your guests cannot see your devices.

Choose a free, open source firewall that I build for you, or a paid one when the job calls for it.

Explore a design

Click around. This is roughly how I would lay it out.

Setting
Firewall

What I do

Design, build and set up

I plan the zones and rules, build or source the firewall, choose switches and access points that fit the space, and set it all up so it works when I hand it over.

Your options

Free or paid firewalls

Open source firewalls such as OPNsense cost nothing in licences. Paid options such as FortiGate or Ubiquiti suit jobs that want vendor features or an appliance. Hardware and any licences are quoted as part of one total.

Start your request

Describe the space and what lives on the network.

A rough picture is plenty. One request starts the job, and you get a written plan back.

  1. In writingOne message starts the job, so your request and my answer are both on record.
  2. ConsideredI read it properly and reply with a plan or quote, not a rushed one-liner.
  3. Your callNothing starts until you approve it.
What is it for?
What matters most?
What you get back

A written plan covering the zones, the firewall choice, the switching and Wi-Fi, and one total price in CAD.

Nothing is bought or built until you approve it.

Or email me at [email protected]

← all services
Sell your hardware

Got hardware you no longer need? Send me a list.

Every piece of gear gets an honest look. If it has resale life, I make you an offer. If it is too old or too far gone for that, I will still take it off your hands, free of charge.

Working parts go toward local donation builds, and the rest is recycled responsibly. Nothing judged, nothing wasted, and kept out of landfill wherever possible.

What I look at

Send what you have. I will take a look.

I make offers on hardware with resale life, in single items or bulk lots, from businesses and from individuals. The best of it goes into my builds or gets sold on as tested parts. Everything else still has a home here.

GPUsServersWorkstationsComplete PCsStorage and drivesNetworking gearMemoryCPUsMotherboards and parts
  1. In writingOne message starts it, so your list and my quote are both on record.
  2. ConsideredI go through your list properly and reply with a written answer, not a rushed one.
  3. Your callYou decide whether to accept. Pickup or shipping is arranged after we have talked.
What do you have?
What happens next

I look through your list and reply by email with a written quote for anything with resale life.

Anything I cannot make an offer on, I will still take off your hands free of charge, and I will say so in the same reply.

Or email me at [email protected]

Your data

Every drive is sanitized. A certificate is available on request.

Every drive that comes through the workshop is sanitized following NIST SP 800-88, the media sanitization standard used by corporate IT departments. That covers drives I buy, drives that arrive for free recycling, and drives in lab gear I prepare.

The standard

NIST SP 800-88

The same media sanitization guidelines corporate IT departments follow when equipment leaves their hands.

The paperwork

A certificate on request

You can get a certificate of data sanitization listing the drive's serial number, the method used and the date.

Every drive

Bought, donated or recycled

Internal or inside a PC, each drive is sanitized before anything is reused, donated or recycled.

Certificate of data sanitization on request
  • Drive serial numberRecorded for each drive
  • Method usedNamed on the certificate
  • DateRecorded when the work is done
  • ReferenceNIST SP 800-88

Example of what the certificate covers.

Before it leaves your hands. Back up anything you want to keep. Sanitized data is not meant to come back.
If it is too old or too far gone

Nothing judged, nothing wasted.

I will still take it off your hands, free of charge. Not every piece has resale life, and that is fine. Working parts go toward local donation builds, and the rest is recycled responsibly and kept out of landfill wherever possible.
← all services
Local AI

Local AI is coming soon.

I am building and testing machines and setups for running AI at home or in the office. Machines I build for AI use brand new parts. Details will be posted here when it is ready.

tin@vault:~$ systemctl status local-ai
● local-ai.service - Local AI at The Tin Vault
   Loaded: yes
   Active: building and testing
   Opens:  soon

Want to hear when it opens? Join the waitlist with one message. I will write to you once, when it is ready.

What would it be for?

Or email me at [email protected]